Projects @ Contact

Caliper replacement lid

• STL
• Fusion360 design

Screw driver marker

The markers works well for bigger screw drivers (shaft diameter 6,5,4). For smaller screw drivers the part gets too small to write on.

The OpenSCAD code can generate markers for multiple screw driver sizes in one go.

• OpenSCAD code

For the smaller screw driver I used these flag shaped markers

• Fusion360 design

Hook to hang bucket for 3D printing filament waste

• STL
• Fusion360 design

Spirit GX replacement parts

• White “flag” to interrupt the light barrier when homing the X axis
• Black bracket (next to “flag”) to hold the Z focusing “pen”

• Flag - DXF
• Flag - fusion360 design
• Focusing Pen holder - STL
• Focusing Pen holder - fusion360 design

Spice rack prototype

• Fusion360 design

Flipchart hooks

Hooks to hold flipchart paper

• STL
• Fusion360 design

Cable hanger

• STL
• Fusion360 design

Soap tray

When getting soap from the dispenser to clean the hands there was always some soap which would spill on the surface below. These trays are mounted under the soap dispensers in the bathrooms to catch the spilled soap.

• Tray STL
• Mounting bracket STL
• Fusion360 design

Lamp stand

• STL
• Fusion360 design

Balancing bird

Balancing bird made by laser cutting 3 mm bamboo. The edges were sanded to remove the brown marks from the laser.

• Fusion360 design
• DXF

Bee box light holder

Clip to hold the lights in the bee boxes. Used to replace broken clips.

• STL
• Fusion360 design